Hangzhou Ocean Industry Co., Ltd. on Hiinas üks juhtivaid fv-seeria konveierikettide tootjaid ja tarnijaid. Tere tulemast meie tehasest Hiinas valmistatud vastupidavate tööstuskettide ja jõuülekande osade hulgimüügile. Kõik kohandatud tooted on kõrge kvaliteediga ja konkurentsivõimelise hinnaga.
Hangzhou Ocean Industry Co., Ltd. on professionaalne tootja ja enamik meie kaupadest eksporditakse Euroopasse alates 2005. aastast.
Meie spetsiaalsed lisaseadmed ja põllumajandusketid sobivad kõikidesse karmidesse farmi töötingimustesse. Need on valmistatud kulumiskindlast legeerterasest, mis on kaetud -korrosioonivastase kattega ja ühilduvad harvesterite, traktorite ja presside kohandatud K, F, CA lisaseadmetega. Kõrge tõmbetugevus tagab pikema kasutusea, paindlik originaalseadmete tootja ja ODM globaalsetele põllumajandusmasinate hulgimüüjatele.
Parameeter
Enamik meie OEM-kliente saadab meile joonise ja me toodame vastavalt nende joonisele. Võite saata meile joonised ka e-postiga-, siis meie insener pakub abi. Kui joonist pole, näidis ka OK. Kataloog ka korras.
FV-seeria konveieriketid vastavad DIN-standardile, sealhulgas peamiselt FV-tüüpi konveierikett, FVT-tüüpi konveierikett ja FVC-tüüpi õõnestihvtiga konveierikett
FV-seeria konveierikett viitab rull- või muhvketile, mille keti samm on täisarv (erinevad sammud on vahemikus 40 mm kuni 500 mm). Rullidel on mitmesugused konstruktsioonivormid ja erinevad tarvikud on konfigureeritud vastavalt teenindustingimustele
FV-tüüp on tahke tihvtidega ülekandekett, FVC-tüüp on õõnestihvtiga ülekandekett, FVT-tüüp on suure rulliga tõsteahela plaadi ülekandekett ning FV-tüüpi ja FVT-tüüpi kett sisaldab kahte tüüpi tooteid, millel on tõmbetugevusindeksid, mille vahel kasutajad saavad valida.
Tooteid kasutatakse laialdaselt Euroopa turgudel, transportides materjale üldtransportimiseks ja mehhaniseeritud transpordiseadmeteks.
Joonised ja parameetrite andmed
FVT seeria konveieriketid
| DIN Kett nr. |
Pitch | Rull läbimõõt |
Pin läbimõõt |
Bush läbimõõt |
Plaat paksus |
||||||
| P | d1 max |
d2 max |
d3 max |
T max |
|||||||
| mm | mm | mm | mm | mm | |||||||
| FVT40 | 40.0 | 50.0 | 63.0 | 80.0 | 100.0 | 125.0 | - | 32.0 | 10.0 | 15.0 | 3.0 |
| FVT63 | 63.0 | 80.0 | 100.0 | 125.0 | 160.0 | - | - | 40.0 | 12.0 | 18.0 | 4.0 |
| FVT90 | 63.0 | 80.0 | 100.0 | 125.0 | 160.0 | 200.0 | 250.0 | 48.0 | 14.0 | 20.0 | 5.0 |
| FVT112 | 100.0 | 125.0 | 160.0 | 200.0 | 250.0 | - | - | 55.0 | 16.0 | 22.0 | 6.0 |
| FVT 140 | 100.0 | 125.0 | 160.0 | 200.0 | 250.0 | - | - | 60.0 | 18.0 | 25.0 | 6.0 |
| FVT 180 | 125.0 | 160.0 | 200.0 | 250.0 | 315.0 | - | - | 70.0 | 20.0 | 30.0 | 8.0 |
| 250 FVT | 160.0 | 200.0 | 250.0 | 315.0 | - | - | - | 80.0 | 26.0 | 36.0 | 8.0 |
| FVT315 | 160.0 | 200.0 | 250.0 | 315.0 | 400.0 | - | - | 90.0 | 30.0 | 42.0 | 10.0 |
| DIN Kett nr. |
Laius vahel sisemised plaadid |
Pin pikkus |
Plaat sügavus |
Tõmbetugevus tugevus |
|||
| b1 min |
L max |
Lc max |
h2 max |
h max |
Q min |
*Q min |
|
| mm | mm | mm | mm | mm | kN/lbf | kN/lbf | |
| FVT40 | 18.0 | 36.0 | 39.0 | 35.0 | 22.5 | 40.0/9091 | 47.0/10681 |
| FVT63 | 22.0 | 45.0 | 48.5 | 40.0 | 25.0 | 63.0/14317 | 75.0/17045 |
| FVT90 | 25.0 | 53.0 | 56.5 | 45.0 | 27.5 | 90.0/20453 | 115.0/26136 |
| FVT112 | 30.0 | 62.0 | 66.0 | 50.0 | 30.0 | 112.0/25452 | 170.0/38636 |
| FVT 140 | 35.0 | 67.0 | 71.5 | 60.0 | 37.5 | 140.0/31815 | 180.0/40908 |
| FVT 180 | 45.0 | 86.0 | 92.0 | 70.0 | 45.0 | 180.0/40908 | 250.0/56817 |
| 250 FVT | 55.0 | 97.0 | 103.5 | 80.0 | 50.0 | 250.0/56817 | 300.0/68181 |
| FVT315 | 65.0 | 113.0 | 126.5 | 90.0 | 55.0 | 315.0/71591 | 480.0/109089 |
| *Q tähistab tõmbetugevust pärast kõvenemist | |||||||
FV seeria konveieriketid koos kinnitustega
| DIN Kett nr. |
P | L | G | d4 | F | W | h4 |
| mm | mm | mm | mm | mm | mm | mm | |
| FV40 | 50.0 63.0 80.0 100.0 125.0 |
△ △ 25.0 30.0 30.0 |
45.0 31.0 45.0 50.0 60.0 |
6.5 | 25.0 | 40.5 | 20.0 |
| FV63 | 63.0 80.0 100.0 125.0 160.0 |
△ 25.0 30.0 40.0 50.0 |
40.0 45.0 50.0 60.0 70.0 |
8.4 | 34.0 | 50.0 | 30.0 |
| FV90 | 63.0 80.0 100.0 125.0 160.0 200.0 250.0 |
△ 25.0 30.0 40.0 50.0 60.0 65.0 |
30.0 45.0 50.0 60.0 70.0 80.0 85.0 |
8.4 | 40.0 | 64.0 | 35.0 |
| FV112 | 100.0 125.0 160.0 200.0 250.0 |
30.0 40.0 50.0 65.0 80.0 |
50.0 65.0 75.0 90.0 105.0 |
11.0 | 50.0 | 70.0 | 40.0 |
| △ 1 auguga kinnitused | |||||||
| DIN Kett nr. |
P | L | G | d4 | F | W | h4 |
| mm | mm | mm | mm | mm | mm | mm | |
| FV140 | 100.0 125.0 160.0 200.0 250.0 |
30.0 40.0 50.0 65.0 80.0 |
55.0 65.0 75.0 90.0 105.0 |
11.0 | 50.0 | 81.0 | 45.0 |
| FV180 | 125.0 160.0 200.0 250.0 315.0 |
35.0 50.0 65.0 80.0 100.0 |
63.0 80.0 95.0 110.0 130.0 |
13.0 | 64.0 | 91.0 | 45.0 |
| FV250 | 160.0 200.0 250.0 315.0 400.0 |
50.0 65.0 80.0 100.0 100.0 |
80.0 95.0 110.0 130.0 130.0 |
14.0 | 69.0 | 106.0 | 55.0 |
| FV315 | 160.0 200.0 250.0 315.0 400.0 |
△ 65.0 80.0 100.0 100.0 |
50.0 95.0 110.0 130.0 130.0 |
14.0 | 85.0 | 130.0 | 60.0 |
| △ 1 auguga kinnitused | |||||||
| Kett nr. | Pitch | Rull läbimõõt |
Laius vahel sisemised plaadid |
Pin läbimõõt |
Pin pikkus |
Tõmbetugevus tugevus |
Keskmine tõmbetugevus tugevus |
Kaal per meeter |
|
| P | d1 max |
b1 min |
d2 max |
L max |
Lc max |
Q min |
Q0 | q | |
| mm | mm | mm | mm | mm | mm | kN/lbf | kN | kg/m | |
| FV40A2.02-P-40 | 40.00 | 32.00 | 18.00 | 10.00 | 36.0 | 40.0 | 40.0/8992 | 44.0 | 4.98 |
| FV63A2F4-S-100 | 100.00 | 26.00 | 22.00 | 12.00 | 46.0 | 50.0 | 63.0/14172 | 69.3 | 3.95 |
| FV90A2F1-P-85 | 85.00 | 50.00 | 25.00 | 14.00 | 52.0 | 56.5 | 90.0/20250 | 100.0 | 10.15 |
| FV90A2F1-P-100 | 100.00 | 50.00 | 25.00 | 14.00 | 52.0 | 56.5 | 90.0/20250 | 100.0 | 8.74 |
| FV112F1A1-P-100 | 100.00 | 55.00 | 30.00 | 16.00 | 71.0 | 76.5 | 180.0/40492 | 200.0 | 14.30 |
| FV112F1A1-P-80 | 80.00 | 55.00 | 30.00 | 16.00 | 71.0 | 76.5 | 180.0/40492 | 200.0 | 16.60 |
| FV112F14A2-P-125 | 125.00 | 55.00 | 30.00 | 16.00 | 63.0 | 67.5 | 112.0/25454 | 123.2 | 10.00 |
| FV180F21A2-P-160 | 160.00 | 80.00 | 45.00 | 20.00 | - | 90.0 | 180.0/40492 | 200.0 | 20.40 |
| FV250K2F8-P-250 | 250.00 | 80.00 | 55.00 | 26.00 | - | 107.5 | 250.0/56817 | 275.0 | 22.60 |
| Kett nr. | P | L1 | G | F | W | h₄ | h2 | d4 | T |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | |
| FV40A2.02-P-40 | 40.00 | 17.00 | 30.00 | 60.0 | 90.0 | 20.0 | 25.0 | 6.4 | 3.00 |
| FV63A2F4-S-100 | 100.00 | 30.00 | 50.00 | 86.0 | 106.0 | 20.0 | 30.0 | 10.0 | 4.00 |
| FV90A2F1-P-85 | 85.00 | 40.00 | 60.00 | 80.0 | 109.2 | 40.0 | 35.0 | 9.5 | 5.00 |
| FV90A2F1-P-100 | 100.00 | 40.00 | 60.00 | 80.0 | 109.2 | 40.0 | 35.0 | 9.5 | 5.00 |
| FV112F1A1-P-100 | 100.00 | △ | 50.00 | 120.0 | 164.0 | 50.0 | 40.0 | 15.0 | 8.00 |
| FV112F1A1-P-80 | 80.00 | △ | 50.00 | 120.0 | 164.0 | 50.0 | 40.0 | 15.0 | 8.00 |
| FV112F14A2-P-125 | 125.00 | 40.00 | 65.00 | 100.0 | 130.0 | 40.0 | 40.0 | 11.0 | 6.00 |
| FV180F21A2-P-160 | 160.00 | 50.00 | 80.00 | 140.0 | 180.0 | 40.0 | 50.0 | 14.0 | 8.00 |
| FV250K2F8-P-250 | 250.00 | 80.00 | 120.00 | 140.0 | 191.0 | 50.0 | 60.0 | 14.0 | 8.00 |
| △ 1 auguga kinnitused | |||||||||
| DIN Kett nr. |
Pitch | Rull dimensioon |
Bush läbimõõt |
||||||||||
| P | d1 max |
d4 max |
d5 max |
d6 max |
G | d3 max |
|||||||
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | |
| FV40 | 50.0 | 63.0 | 80.0 | 100.0 | 125.0 | - | - | 32.0 | 20.0 | 40.0 | 50.0 | 4.0 | 15.0 |
| FV63 | 50.0 | 63.0 | 80.0 | 100.0 | 125.0 | 160.0 | - | 40.0 | 26.0 | 50.0 | 63.0 | 5.0 | 18.0 |
| FV90 | 63.0 | 80.0 | 100.0 | 125.0 | 160.0 | 200.0 | 250.0 | 48.0 | 30.0 | 63.0 | 78.0 | 6.5 | 20.0 |
| FV112 | 80.0 | 100.0 | 125.0 | 160.0 | 200.0 | 250.0 | - | 55.0 | 32.0 | 72.0 | 90.0 | 7.5 | 22.0 |
| FV140 | 63.0 | 100.0 | 125.0 | 160.0 | 200.0 | 250.0 | - | 60.0 | 36.0 | 80.0 | 100.0 | 9.0 | 26.0 |
| FV180 | 100.0 | 125.0 | 160.0 | 200.0 | 250.0 | 315.0 | - | 70.0 | 42.0 | 100.0 | 125.0 | 13.0 | 30.0 |
| FV250 | 125.0 | 160.0 | 200.0 | 250.0 | 315.0 | 400.0 | - | 80.0 | 50.0 | 125.0 | 155.0 | 15.0 | 36.0 |
| FV315 | 160.0 | 200.0 | 250.0 | 315.0 | 400.0 | - | - | 90.0 | 60.0 | 140.0 | 175.0 | 18.0 | 42.0 |
| DIN Kett nr. |
Laius vahel sisemised plaadid |
pin läbimõõt |
Pin pikkus |
Plaat sügavus |
Plaat paksus |
Tõmbetugevus tugevus |
||
| b1 min |
d2 max |
L min |
Lc max |
h2 max |
T max |
Q min |
*Q min |
|
| mm | mm | mm | mm | mm | mm | kN/lbf | kN/lbf | |
| FV40 | 18.0 | 10.0 | 36.0 | 39.0 | 25.0 | 3.0 | 40.0/9091 | 47.0/10681 |
| FV63 | 22.0 | 12.0 | 45.0 | 48.5 | 30.0 | 4.0 | 63.0/14317 | 75.0/17045 |
| FV90 | 25.0 | 14.0 | 53.0 | 56.5 | 35.0 | 5.0 | 90.0/20453 | 115.0/26136 |
| FV112 | 30.0 | 16.0 | 62.0 | 66.0 | 40.0 | 6.0 | 112.0/25452 | 170.0/38636 |
| FV140 | 35.0 | 18.0 | 67.0 | 71.5 | 45.0 | 6.0 | 140.0/31815 | 180.0/40908 |
| FV180 | 45.0 | 20.0 | 86.0 | 92.0 | 50.0 | 8.0 | 180.0/40908 | 250.0/56817 |
| FV250 | 55.0 | 26.0 | 97.0 | 103.5 | 60.0 | 8.0 | 250.0/56817 | 300.0/68181 |
| FV315 | 65.0 | 30.0 | 113.0 | 126.5 | 70.0 | 10.0 | 315.0/71591 | 480.0/109089 |
| *Q tähistab tõmbetugevust pärast kõvenemist | ||||||||
| Kett nr. | Pitch | Rull läbimõõt |
Pin läbimõõt |
Pin pikkus |
Plaat sügavus |
Plaat paksus |
Tõmbetugevus tugevus |
Kaal per meeter |
||||||
| P | d1 max |
d3 max |
d4 max |
d5 max |
d6 max |
G | d2 max |
L max |
Lc max |
h2 max |
t/T max |
Q min |
q | |
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | kN/lbf | kg/m | |
| FV40F3-P-63 | 63.0 | 32.0 | - | - | - | - | - | 10.0 | 38.1 | 41.5 | 45.0 | 4.0 | 80.0/17985 | 2.13 |
| FV63F11-P-100 | 100.0 | 40.0 | - | - | - | - | - | 14.0 | 37.0 | - | 30.0 | 4.0 | 60.0/13488 | 3.89 |
| FV63F12-P-125 | 125.0 | 40.0 | - | - | - | - | - | 10.0 | 44.5 | 48.0 | 30.0 | 4.0 | 63.0/14162 | 3.84 |
| FV90-B-50 | 50.0 | - | 20.0 | - | - | - | 14.0 | 52.0 | 56.4 | 35.0 | 5.0 | 90.0/20453 | 6.10 | |
| FV90F9-B-100 | 100.0 | - | 20.0 | - | - | - | 14.0 | 60.2 | 64.6 | 35.0 | 6.0/8.0 | 90.0/20453 | 6.00 | |
| FV90F10-B-100 | 100.0 | - | 20.0 | - | - | - | 14.0 | 60.2 | 64.6 | 40.0 | 6.0/8.0 | 90.0/20453 | 6.83 | |
| FV112-S-63 | 63.0 | - | - | 32.0 | - | - | 16.0 | 63.0 | 67.5 | 40.0 | 6.0 | 112.0/25454 | 8.80 | |
| FV140-B-80 | 80.0 | - | 26.0 | - | - | 18.0 | 67.0 | 72.5 | 45.0 | 6.0 | 140.0/31473 | 8.55 | ||
| FV140-PF1-125 | 125.0 | 65.0 | - | - | - | - | - | 18.0 | 67.0 | 71.5 | 45.0 | 6.0 | 140.0/31473 | 12.76 |
| FV140F27-F-125 | 125.0 | - | - | - | 80.0 | 93.5 | 9.5 | 18.0 | 68.4 | 73.0 | 45.0 | 6.4 | 140.0/31473 | 17.00 |
| FV180-B-150 | 150.0 | - | 30.0 | - | - | - | - | 20.0 | 85.5 | 92.0 | 50.0 | 8.0 | 180.0/40492 | 8.24 |
KKK
K: Millised konstruktsioonivariandid on FV-seeria kettide jaoks saadaval?
V: Valimiseks on täistihvt FV, õõnestihvt FVC ja kõrge rulliga FVT tüübid.
K: Kas FV konveieri kettidele saab paigaldada sobivaid lisaseadmeid?
V: Erinevaid A/K-tüüpi manuseid saab kohandada vastavalt edastamisnõuetele.
K: Kui kaua on teie tarneaeg ja saadetis?
V: 1. Näidiste esitamise ajad: tavaliselt 10 tööpäeva.
2. Tootmise tähtaeg-: 20–40 tööpäeva pärast sissemakse saamist.
K: Mis on teie eelised?
V: 1. Tootja, kõige konkurentsivõimelisem hind ja hea kvaliteet.
2. Täiuslikud tehnilised insenerid pakuvad teile parimat tuge.
3. OEM on saadaval.
4. Rikas varu ja kiire kohaletoimetamine.
Kuum tags: fv-seeria konveieriketid, Hiina fv-seeria konveierikettide tootjad, tarnijad, tehas
